Your cart
Keurig Troubleshooting: 5 Simple Solutions to Common Problems
Coffee For Less Blog

Keurig Troubleshooting: 5 Simple Solutions to Common Problems

Left Back to Blog
coffee-for-less-blog

Save Time and Money with These Keurig K-Cup Brewer Solutions

Having problems with your Keurig K-Cup Brewer? Repeated usage can cause functional issues, which will impact the brew quality of your Keurig K-Cup Pods and ultimately your coffee drinking experience. The good news is there are a number of ways to fix these problems and get your machine to function as good as new. Here are five common Keurig troubleshooting solutions and easy ways to correct these problems.

Common Problem 1: K-Cup Coffee and Tea Grounds Get into Your K-Cup Holder and Causes a Water Line Clog

Keurig Troubleshooting Solution: Remove or clean the needle that punctures the K-Cup Pod then do a small cup cleansing brew to clean out any residual. This will ensure any left-over debris is flushed out before you have you start your next brew.

Common Problem 2: K-Cup Brewer Shuts Off Unexpectedly Between Brews

Keurig Troubleshooting Solution: Remove the water reservoir and insert it back into place. The magnet in the reservoir can become dislodged during brewing from the vibrations in the machine.

Common Problem 3: Not Ready Message on Your Keurig Machine Stays On

Keurig Troubleshooting Solution:

  • Turn off your machine and unplug it
  • Detach the water reservoir
  • Wait 5 seconds then repeat the steps 1 and 2
  • Insert the water reservoir then press the menu button and when the “Not Ready” message appears lower handle

Common Problem 4:  Blinking Blue Light in Water Reservoir

Keurig Troubleshooting Solution: Simply add more water to the reservoir. All K Cup Coffee Maker models need a minimum amount of water to activate the brewing process, so if you’re reservoir is low the machine will not start.

Common Problem 5: Installing Your Water Filter 

Keurig Troubleshooting Solution: This problem applies to only the models with the water filter feature. If you own one of these models, you can install the filter in three simple steps:

  • Soak the entire filter in cold water for five seconds
  • Place the filter at the bottom of the Water Handle Assembly
  • Set the timing dial two months from the day to ensure it is replaced at the appropriate time

Use these five Keurig troubleshooting solutions for your machine and you’ll ensure your coffee and tea always taste great and your brewer lasts a long time. As a result, you’ll save yourself time and money not having to replace your Keurig K-Cup Brewer.

SEE ALSO: WHAT'S THE DEAL WITH KEURIG CUP SIZES?



263 comments

  • Last time K-compact made a buzzing noise after brewing one cup. Now all four lights come on but will not brew coffee. Need a solution.

    Beverly Saunders
  • My machine has a sensor that reminds me to put a cup in place, before it will brew.
    My cup is in place, (many, changes, …) but it is not bring recognized.
    So, sad… no coffee. No easy coffee.
    I am afraid to disassemble without guidance.

    Judy Newkumet
  • Coffee will not brew

    Sylvia
  • MY MODEL # b60 does not complet it s brew and shuts off.i have to lift up the handle wait 15 -20 seconds and restart the brew..this can be done 1 or 2 times before the cup is full.what could be the problem??

    ROBERT BLACKBURN
  • When I turn coffee maker on it starts running water before I select or install a pod. We have descaled it . HELP

    Carol Truitt

Leave a comment

Please note, comments must be approved before they are published